Preform loading and feeding system

Prefrom are feed by feeding belt to the feeding tramroad. A durable parallel adjustable set ensure the perform feed to and place on the carry head.

After the perform reached its' right position, it will be fed to heating units by manipulator one by one under headstand mode of the preform's.

Perform heating system
The perform goes though the heating area in a line one by one(total 4 groups of heating case, 8pcs heating lamp in every case) under headstand mode of the preform's. In the heating area, in order to be sure the perform get precise heating, every lamp 's position could be adjusted independently and every heating lamp 's power is controlled by control computerby. In order to get stability heating result and avoid the effect of the environment factor, an infrared camera is used to watch the heating condition in the heating course in the system.
Stretch-blowing molding system

The mold 's open-close action works under the control of compressed air system and computer. The installation and disintallation operation of the mold is very facility.

The stretch bar goes into perform from the center hole of feeding plate, the Ħ°OĦħ seal to be sure that the compressed air not leaking in the bottle's molding course.

In order to suit for the special requirements of the hot filled bottle and refilled bottle, the mold 's temperature could be adjust into two or more modes.

Control system

The produce parameter 's loading course is simply and facility though the friendly touched interface of reliable programmable logic control. In the other hand, most production parameter could be adjusted solely in producing course. In the system's working course, the self-diagnose system could display the wrong operation on the LCD