Hopper dryer, dehumidifying dryer manufacturer--China Hisson plastic machinery co., ltd. We are professional hopper dryer, dehumidifying dryer manufacturer and hopper dryer, dehumidifying dryer factory in China. We can produce hopper dryer, dehumidifying dryer according to your requirements. More types of hopper dryer, dehumidifying dryer wanted, please contact us right now!
Click to get the introduction of auxiliary equipments for Blow Molding Machine: |  Air Compressor  |  Air Dryer  | Air Filter|
For Preform Injection Molding
| Auto Loader | Hopper Dryer | Dehumidifying Dryer |Water Chiller |
    | Cooling Tower | Crusher |

This machine is used for eliminating the moisture at a dew point.For the plastic material with strong moisture absorbing characteristic(e.g.PET resin), dehumidifying dryer is a necessary equipment.

..Accurate P.I.D. Temp controller provides digital setting and display of regeneration temperature.

..24-hr timer for auto start-up operation and operation fault diagnosis automatic.

..After cooler fitted standard.

..Adjustable rotation speed of the desiccant rotor.

..Mot overload and phase reversal protection.

..Display of return air temperature.

..Dried air has a dew-point of down to -50 ¡æ.

..Electrical circuit built to comply with CE Safety Requirements.

Model
 SD50
SD80
SD120
SD150
SD200
SD300
SD400
 SD500
Dry air flow rate (m3/hr)
50
80
120
150
200
300
400
500
Dry air flow rate (m3/hr)
0.2
0.4
0.75
1.5
1.9
2.6
1.5
2.2
Drying blower power
Consumption  (Kw)
0.045
0.2
0.2
0.4
0.4
0.75
0.75
1.9
Regenerative heater
Power consumption  (Kw)
2
3.5
3.5
4
5.4
7.2
7.2
10
Pipe  diameter of inlet
   and outlet  (Inch)
1~1/2"
2"
2"
2"
2~1/2"
3"
3"
4"
Voltage (V)
220/380/415/440(3 ¦Õ )
Width (mm)
450
750
750
600
600
600
800
800
  Length (mm)
700
480
480
1100
1100
1100
1380
1380
Height (mm)
1000
1000
1250
1680
1680
1680
1790
1790
Weight (Kg)
80
120
120
215
225
240
280
290

What is Honeycle?

The molecular sieve and silica gel are strongly bonded to ceramic fibres inside the rotor does not produce any crystallization therefore, the rotor does not produce any powder and offers an extremely long service life. Moist air
passes through numerous small holes in the rotor (desiccant) winch efficiently absorbs the moisture therefore, the air departing from the rotor is thoroughly dehumidified and produces extremely low dew-point dry air. Regeneration is operated under the same principle but in reverse direction through the rotor (desiccant).

| Cooling Tower | Crusher |
| Auto Loader | Hopper Dryer | Dehumidifying Dryer | Water Chiller |

For Preform Injection Molding
Click to get the introduction of auxiliary equipments for Blow Molding Machine: |  Air Compressor  |  Air Dryer  | Air Filter|